4 ton forklift with Isuzu Diesel Engine
General | 1 | Model | CPC40/CPCD40 | |||||
| 2 | Power Type | Diesel | ||||||
| 3 | Rated capacity | Kg | 4000 | |||||
| 4 | Load center | mm | 500 | |||||
| Charactertic | 5 | Lifting height | mm | 3000 | ||||
| 6 | Fork size | mm | 1070*150*50 | |||||
| 7 | Mast Tilt Angle | Deg | 6°/12° | |||||
| 8 | Front Overhang(Wheel center to fork face) | mm | 548 | |||||
| 9 | Ground Clearance(Bottom Of Mast) | mm | 160 | |||||
| 10 | Overall Dimension | Overall length(with/without fork) | mm | 4064/2963 | ||||
| 11 | Overall width | mm | 1400 | |||||
| 12 | Mast lowered height | mm | 2180 | |||||
| 13 | MastExtended height(with backrest) | mm | 4260 | |||||
| 14 | Overhead guard height | mm | 2185 | |||||
| 15 | Turning Radius(outside) | mm | 2739 | |||||
| 16 | Min. intersecting aisle | mm | 2800 | |||||
| Performance | 17 | Speed | Travel(Full/Empty load) | km/h | 17/18 | |||
| 18 | Lifting(Full/Empty load) | mm/s | 300/400 | |||||
| 19 | Max.Gradeability | % | 20 | |||||
| Chassis | 20 | Tire | Front | 250-15-18PR | ||||
| 21 | Rear | 7.00-12-12PR | ||||||
| 22 | Wheelbase | mm | 1850 | |||||
| 23 | Self Weight | kg | 5800 | |||||
| Transmission | 24 | Battery | Voltage/Capacity | V/Ah | 12/120 | |||
| 25 | Engine | Model | CA498 | 4JG2 | ||||
| 26 | Manufacturer | DaChai | ISUZU | |||||
| 27 | Rated output/r.p.m | kW/rpm | 45/2450 | 44/2500 | ||||
| 28 | Rated torque/r.p.m | Nm/rpm | 190/1700-1900 | 186/1600-1800 | ||||
| 29 | No. of cylinder | 4 | 4 | |||||
| 30 | Bore x Stroke | mm | 98x105 | 95.4X107 | ||||
| 31 | Displacement | cc | 3168 | 3059 | ||||
| 32 | Fuel Tank capacity | L | 90 | 90 | ||||
| 33 | Transmission | Type | Machanical/Hydraulic | |||||
| 34 | Operation Pressure for Attachment | Mpa | 17.5 | |||||
4 ton forklift with Isuzu Diesel Engine
General | 1 | Model | CPC40/CPCD40 | |||||
| 2 | Power Type | Diesel | ||||||
| 3 | Rated capacity | Kg | 4000 | |||||
| 4 | Load center | mm | 500 | |||||
| Charactertic | 5 | Lifting height | mm | 3000 | ||||
| 6 | Fork size | mm | 1070*150*50 | |||||
| 7 | Mast Tilt Angle | Deg | 6°/12° | |||||
| 8 | Front Overhang(Wheel center to fork face) | mm | 548 | |||||
| 9 | Ground Clearance(Bottom Of Mast) | mm | 160 | |||||
| 10 | Overall Dimension | Overall length(with/without fork) | mm | 4064/2963 | ||||
| 11 | Overall width | mm | 1400 | |||||
| 12 | Mast lowered height | mm | 2180 | |||||
| 13 | MastExtended height(with backrest) | mm | 4260 | |||||
| 14 | Overhead guard height | mm | 2185 | |||||
| 15 | Turning Radius(outside) | mm | 2739 | |||||
| 16 | Min. intersecting aisle | mm | 2800 | |||||
| Performance | 17 | Speed | Travel(Full/Empty load) | km/h | 17/18 | |||
| 18 | Lifting(Full/Empty load) | mm/s | 300/400 | |||||
| 19 | Max.Gradeability | % | 20 | |||||
| Chassis | 20 | Tire | Front | 250-15-18PR | ||||
| 21 | Rear | 7.00-12-12PR | ||||||
| 22 | Wheelbase | mm | 1850 | |||||
| 23 | Self Weight | kg | 5800 | |||||
| Transmission | 24 | Battery | Voltage/Capacity | V/Ah | 12/120 | |||
| 25 | Engine | Model | CA498 | 4JG2 | ||||
| 26 | Manufacturer | DaChai | ISUZU | |||||
| 27 | Rated output/r.p.m | kW/rpm | 45/2450 | 44/2500 | ||||
| 28 | Rated torque/r.p.m | Nm/rpm | 190/1700-1900 | 186/1600-1800 | ||||
| 29 | No. of cylinder | 4 | 4 | |||||
| 30 | Bore x Stroke | mm | 98x105 | 95.4X107 | ||||
| 31 | Displacement | cc | 3168 | 3059 | ||||
| 32 | Fuel Tank capacity | L | 90 | 90 | ||||
| 33 | Transmission | Type | Machanical/Hydraulic | |||||
| 34 | Operation Pressure for Attachment | Mpa | 17.5 | |||||
