A counter balance Motar Forklift Reach , a gefe guda, na iya ɗaukar lodin da ya yi tsayi da yawa don isa ga babbar motar. An ƙera waɗannan manyan motocin ne don samun babban ma'auni na baya, wanda ke rama nauyin da aka ɗaga a gaba. Irin wannan motar ta fi dacewa ga yanayin da kaya yayi nauyi sosai don isa.
M ƙasa Motocin forklift suna da manyan tayoyin huhu kuma yawanci injin konewa ne ke sarrafa su. Wadannan injunan suna iya aiki akan man fetur, diesel, ko propane. Ana iya haɗa su da haɓakar wayar tarho ko hasumiya ta tsaye don ɗaga lodi sama da fita daga injin. Waɗannan motocin sun dace da ayyuka iri-iri, gami da wuraren gine-gine da ramukan tsakuwa.
| Samfura | Naúrar | Saukewa: FGL20 | FGL25 | ||
| Nau'in Wuta | GAS/LPG | GAS/LPG | |||
| Ƙarfin Ƙarfi | kg | 2000 | 2500 | ||
| Load Center | mm | 500 | 500 | ||
| Hawan Tsayi | mm | 3000 | 3000 | ||
| Girman cokali mai yatsa | L*W*T | mm | 1070*122*40 | 1070*122*40 | |
| Mast Tilt Angle | F/R | Daga | 6°/12° | 6°/12° | |
| Overhang na gaba (Cibiyar ƙafa zuwa cokali mai yatsu) | mm | 480 | 480 | ||
| Tsare-tsare na ƙasa (Ƙasa na mast) | mm | 120 | 120 | ||
Gabaɗaya Girma |
Tsawon cokali mai yatsa (Ba tare da cokali mai yatsa ba) | mm | 3654/2570 | 3654/2570 | |
| Gabaɗaya Nisa | mm | 1160 | 1160 | ||
| Mast Sauke Tsayi | mm | 1995 | 1995 | ||
| Mast Height Height (Tare da baya) | mm | 4110 | 4110 | ||
| Babban Tsawon Tsaro | mm | 2130 | 2130 | ||
| Juya Radius (waje) | mm | 2340 | 2340 | ||
| Min.hanyar hanya | mm | 2400 | 2400 | ||
| Gudu | Tafiya(Cikakken kaya) | km/h | 17/19 | 17/19 | |
| Dagawa(Cikakken kaya mara komai) | mm/s | 530/550 | 530/550 | ||
| Max.Mai girma | % | 20 | 20 | ||
| Taya | Gaba | 7.00-12-12PR | 28*9-15-12PR | ||
| Na baya | 6.00-9-10PR | 6.50-10-10PR | |||
| Wheelbase | mm | 1600 | 1850 | ||
| Nauyin kai | kg | 3480 | 4500 | ||
| Baturi | Ƙarfin wutar lantarki | V/A | 12/120 | 12/120 | |
| Injin | Samfura | K21 | K21 | ||
| Mai ƙira | NISSAN | NISSAN | |||
| Ƙididdigar fitarwa/rpm | Kw/rpm | 31.2/2250 | 31.2/2250 | ||
| Ƙimar karfin juyi/rpm | Nm/rpm | 143.7/1600 | 143.7/1600 | ||
| No. na Silinda | 4 | 4 | |||
| Bore × bugun jini | mm | 89*83 | 89*83 | ||
| Kaura | cc | 2065 | 2065 | ||
| Karfin Tankin Mai | L | 60 | 60 | ||
| Watsawa | Nau'in | Injiniya/Hydrauic | Injiniya/Hydrauic | ||
| Mataki | FWD/RVS | 1/1 (2/2) / 1/1 | 1/1 (2/2) / 1/1 | ||
| Matsin aiki don Haɗawa | Mpa | 17.5 | 17.5 | ||
