| Yawan: | |
|---|---|
NUILI Atomatik watsa forklift CPCD30 2 mataki 3meter mast Diesel forklift 3.0T
Diesel Forklift: Tsarin watsa wutar lantarki, mai gadi da manyan motoci duk suna amfani da tsarin dakatarwa biyu, wanda zai iya raunana girgizar da aka canjawa wuri daga dabaran tsarin wutar lantarki, lefa mai sarrafawa da wurin zama, don haka yana sa mai aiki ya sami kwanciyar hankali yayin aiki.
Wannan motar dizal forklift an ƙera shi da babban na'urar nunin ruwa kristal wanda ba wai kawai yana ba da dacewa ga ma'aikaci don fahimtar yanayin aikin motar ba, har ma yana faɗaɗa filin aikin na gani.
Ana iya ƙirƙira wannan motar dizal forklift tare da mast ɗin ɗagawa kyauta guda biyu ko mast mataki uku, kayan alatu da rufaffiyar tuki, tayal mai ƙarfi, mai ɗaukar hoto, madaidaicin madaidaicin madaidaicin ect, don biyan bukatun ku daban-daban.
| Samfura | Saukewa: CPC30/CPCD30 | Saukewa: CPC35/CPCD35 | Saukewa: CPC35X1/CPCD35X1 |
| Nau'in wutar lantarki | Diesel | Diesel | Diesel |
| Ƙarfin Ƙarfi (kg) | 3000 | 3500 | 3500 |
| Shigar da kaya (mm) | 500 | 500 | 500 |
| Matsakaicin tsayin ɗagawa (mm) | 3000 | 3000 | 3000 |
| Girman cokali mai yatsu (LxWxT mm) | 1070x125x45 | 1070x125x50 | 1070x125x50 |
| Mast Tile Angle F/R(Deg) | 6°/12° | 6°/12° | 6°/12° |
| Tsawon Gaba (mm) | 475 | 490 | 490 |
| Tsabtace ƙasa (mm) | 120 | 120 | 120 |
| Tsawon Gabaɗaya (ba tare da cokali mai yatsa ba) mm | 2670 | 2700 | 2700 |
| Faɗin Gabaɗaya (mm) | 1225 | 1225 | 1225 |
| Mast saukar da tsayi (mm) | 2065 | 2125 | 2125 |
| Mast tsawo tsawo (tare da baya) mm | 4150 | 4150 | 4150 |
| Tsayin gadin sama (mm) | 2090 | 2090 | 2090 |
| Matsakaicin radius (a waje) (mm) | 2400 | 2445 | 2445 |
| Hanya mai tsaka-tsaki (mm) | 2110 | 2235 | 2235 |
| Tafiya(cikakken kaya)km/h | 19 | 19 | 19 |
| Saurin ɗagawa (cikakken kaya) mm/s | 440 | 410 | 410 |
| Matsakaicin Girmamawa(%) | 20 | 20 | 20 |
| Taya ta gaba | Saukewa: 28X9-15-12PR | Saukewa: 28X9-15-12PR | Saukewa: 28X9-15-12PR |
| Taya ta baya | 6.50-10-10PR | 6.50-10-10PR | 6.50-10-10PR |
| Ƙwallon ƙafa (mm) | 1700 | 1700 | 1700 |
| Nauyin Kai (kg) | 4390 | 4675 | 4850 |
| Baturi volts/ iya aiki(V/A) | 12/90 | 12/90 | 12/90 |
| Samfurin injin | 490 BPG | 490 BPG | 495 BPG |
| Mai ƙira | Xincha | Xincha | Xincha |
| Ƙididdigar fitarwa Kw/rpm |
37/2650 | 37/2650 | 42/2650 |
| Matsakaicin karfin juyi Nm/rpm |
148/1800-1900 | 148/1800-1900 | 174/1800-2000 |
| No. na Silinda | 4 | 4 | 4 |
| Bore x bugun jini(mm) | 90x100 | 90x100 | 95x105 |
| Matsala(cc) | 2540 | 2540 | 2980 |
| Ƙarfin Tankin Mai (L) | 70 | 70 | 70 |
| Nau'in watsawa | na'ura mai aiki da karfin ruwa / inji | na'ura mai aiki da karfin ruwa / inji | na'ura mai aiki da karfin ruwa / inji |
| Mataki na FWD/RVS | 1/1 (2/2) | 1/1 (2/2) | 1/1 (2/2) |
| Matsin aiki don Haɗawa (Mpa) | 17.5 | 17.5 | 17.5 |
