Introduction:
GTWS series self-propelled single column aerial working platform is suitable for indoor narrow space, with light body weight, compact collection size, width of 0.99m, length of 2.76m and height of 1.99m. The fuselage boom structure is welded with high-strength alloy steel, which has the advantages of high strength and light weight. The working height is 8 meters and the working radius is 3.2 meters horizontally. The machine adopts the newly designed double DC drive motor and is equipped with a large torque reducer, which has the advantages of small input power, large output torque, fast walking speed, strong climbing ability, etc. The fuselage adopts streamlined design, with strong appearance and modern feeling.
Advantage:
• Standard platform with center slide bar
• Auxiliary platform lowering system
• Sudden ground descent
• Proportional lifting and dynamic control
• Random diagnosis system
• AC wire connected to platform
• Adjustable work tray
• Lower and Tilt Alarm
• Steering inner radius is 0
• Two wheel brake
• Hydraulic brake release
• Pit protection device
• Chain mounted rear cover for easy access to the
• There are main electrical and hydraulic components
• Transportation fixing hole
• Wide bell car handling notch
• Non marking solid tire
Self-propelled Single Mast Aerial Work Platform | |
Model | GTWS |
Working height | 8000mm |
platform height | 6000mm |
Outreach Max. | 3150mm |
Lift capacity | 200kg |
Weight | 2800kg |
Platform size | 910*850*1140mm |
Stowed size | 2760*990*1990mm |
Gradeability | 23% |
Wheelbase | 1200mm |
Ground clearance | 75mm |
Pothole Protection board ground clearance | 25mm |
Outside rotation radius | 1820mm |
Inside rotation radius | 0 |
Jib Swing | "-60°/+60° |
Vertical tilt Max. | 3 |
Driving speed-stowed | 4.5km/h |
Driving speed-rising | 0.7km/h |
Power source | DC24V/240Ah |
Tire size | 406*125mm |
Introduction:
GTWS series self-propelled single column aerial working platform is suitable for indoor narrow space, with light body weight, compact collection size, width of 0.99m, length of 2.76m and height of 1.99m. The fuselage boom structure is welded with high-strength alloy steel, which has the advantages of high strength and light weight. The working height is 8 meters and the working radius is 3.2 meters horizontally. The machine adopts the newly designed double DC drive motor and is equipped with a large torque reducer, which has the advantages of small input power, large output torque, fast walking speed, strong climbing ability, etc. The fuselage adopts streamlined design, with strong appearance and modern feeling.
Advantage:
• Standard platform with center slide bar
• Auxiliary platform lowering system
• Sudden ground descent
• Proportional lifting and dynamic control
• Random diagnosis system
• AC wire connected to platform
• Adjustable work tray
• Lower and Tilt Alarm
• Steering inner radius is 0
• Two wheel brake
• Hydraulic brake release
• Pit protection device
• Chain mounted rear cover for easy access to the
• There are main electrical and hydraulic components
• Transportation fixing hole
• Wide bell car handling notch
• Non marking solid tire
Self-propelled Single Mast Aerial Work Platform | |
Model | GTWS |
Working height | 8000mm |
platform height | 6000mm |
Outreach Max. | 3150mm |
Lift capacity | 200kg |
Weight | 2800kg |
Platform size | 910*850*1140mm |
Stowed size | 2760*990*1990mm |
Gradeability | 23% |
Wheelbase | 1200mm |
Ground clearance | 75mm |
Pothole Protection board ground clearance | 25mm |
Outside rotation radius | 1820mm |
Inside rotation radius | 0 |
Jib Swing | "-60°/+60° |
Vertical tilt Max. | 3 |
Driving speed-stowed | 4.5km/h |
Driving speed-rising | 0.7km/h |
Power source | DC24V/240Ah |
Tire size | 406*125mm |
