Injin XinChai na China yana ɗaukar nauyin kilogiram 3000
Forklift ne sufuri abin hawa, amfani da loading da saukewa, short nesa kai, nauyi dagawa, da ake kira masana'antu abin hawa da International kungiyar Standardization ISO / TC110, amfani da matsayin sufuri inji, Yadu amfani da kasa tattalin arzikin sassa, misali: da tashar jirgin kasa, tashar jiragen ruwa, filin jirgin sama, masana'anta, sito, da dai sauransu, ne m kayan aiki inji don loading da kuma saukewa da nisa.
2.5-3.0 ton dizal cokali mai yatsa
1) Injin na zaɓi: China Xinchai Quanchai 490/ 498, Yuro 3 na zaɓi na zaɓi; Japan Isuzu C240/4JG2, Mitsubishi S4S, da dai sauransu;
2) Mast na zaɓi: 3 / 4 / 4.5 / 5m duplex mast, 4.5 / 5 / 5.5 / 6m mast triplex, 3 / 3.3 / 3.5 / 4m duplex cikakken mast kyauta.
3) Watsawa: atomatik / manual;
4) Taya: pneumatic / Solid / maras alama mai ƙarfi;
5) cokali mai yatsu: 1070/1220/1370/1520/1670/1820mm;
6) Haɗe-haɗe: Side shifter, cokali mai yatsa positoner, cokali mai yatsa hannun riga, takarda abin nadi matsa, bale matsa, drum matsa, load extender, rotator, cokali mai yatsa clamps, tura / ja, da dai sauransu.
| Gabaɗaya | 1 | Samfura | Saukewa: CPC30/CPCD30 | |||||
| 2 | Nau'in Wuta | Diesel/GAS | ||||||
| 3 | Ƙarfin ƙima | Kg | 3000 | |||||
| 4 | Load cibiyar | mm | 500 | |||||
| Hali | 5 | Tsawon ɗagawa | mm | 3000 | ||||
| 6 | Girman cokali mai yatsa | mm | 1070*122*40 | |||||
| 7 | Mast Tilt Angle | Daga | 6°/12° | |||||
| 8 | Overhang na gaba (Cibiyar ƙafa zuwa cokali mai yatsu) | mm | 500 | |||||
| 9 | Tsabtace ƙasa (Ƙasa na Mast) | mm | 126 | |||||
| 10 | Gabaɗaya Girma | Tsawon tsayi (tare da / ba tare da cokali mai yatsa ba) | mm | 3790/2700 | ||||
| 11 | Gabaɗaya faɗin | mm | 1230 | |||||
| 12 | Mast saukar da tsayi | mm | 2105 | |||||
| 13 | MastExtended tsawo (tare da baya) | mm | 4110 | |||||
| 14 | Tsawon gadin sama | mm | 2140 | |||||
| 15 | Juya Radius (waje) | mm | 2415 | |||||
| 16 | Min. tsakar hanya | mm | 2500 | |||||
| Ayyuka | 17 | Gudu | Tafiya(Cikakken kaya) | km/h | 18/19 | |||
| 18 | Dagawa(Cikakken kaya mara komai) | mm/s | 460/540 | |||||
| 19 | Max.Mai girma | % | 20 | |||||
| Chassis | 20 | Taya | Gaba | 28x9-15-12PR | ||||
| 21 | Na baya | 6.50-10-10PR | ||||||
| 22 | Wheelbase | mm | 1650 | |||||
| 23 | Nauyin Kai | kg | 4280 | |||||
| Watsawa | 24 | Baturi | Ƙarfin wutar lantarki | V/A | 12/120 | |||
| 25 | Injin | Samfura | C240 | Saukewa: C490BPG | ||||
| 26 | Mai ƙira | ISUZU | XinChang | |||||
| 27 | Ƙididdigar fitarwa/rpm | kW/rpm | 34.3/2500 | 34.3/2500 | ||||
| 28 | Ƙimar karfin juyi/rpm | Nm/rpm | 137.7/1800 | 160/1800-2000 | ||||
| 29 | No. na silinda | 4 | 4 | |||||
| 30 | Bore x bugun jini | mm | 86x102 | 90x105 | ||||
| 31 | Kaura | cc | 2369 | 2670 | ||||
| 32 | Karfin Tankin mai | L | 60 | 60 | ||||
| 33 | Watsawa | Injiniya/Hydraulic | ||||||
| 34 | Matsin aiki don Haɗawa | Mpa | 17.5 | |||||
