Category |
Item |
Sub-item |
Unit |
CPC/CPCD30 (Diesel) |
CPC/CPCD35 (Diesel/Gas) |
Characteristic |
Power type |
- |
- |
Diesel |
Diesel/Gas |
Load capacity |
- |
kg |
3000 |
3500 |
|
Load center |
- |
mm |
500 |
500 |
|
Lifting height |
- |
mm |
3000 |
3500 |
|
Free height |
- |
mm |
145 |
145 |
|
Fork size |
L×W×H |
mm |
1070×125×45 |
1070×125×50 |
|
Mast angle |
Front/Rear |
° |
6/12 |
6/12 |
|
Min. turning radius |
- |
mm |
2470 |
2400 |
|
Min. right angle stacking channel width |
- |
mm |
4280 |
4335 |
|
Min. right angle channel width |
- |
mm |
2120 |
2235 |
|
Ground clearance |
- |
mm |
120 |
120 |
|
Overhead guard height |
- |
mm |
2120 |
2120 |
|
Front overhang |
- |
mm |
498 |
498 |
|
Performance |
Max. driving speed |
Full Load |
km/h |
19 |
19 |
Max. lifting speed |
Full Load |
mm/s |
460 |
460 |
|
Max. traction |
Full load |
kW |
20 |
20 |
|
Max. climb capacity |
Full load |
% |
20 |
20 |
|
Dimensions |
Overall length |
With fork |
mm |
3825 |
2660 |
Overall length |
Without fork |
mm |
2735 |
1265 |
|
Overall width |
- |
mm |
1230 |
1265 |
|
Max. lifting height of fork (with shelving) |
- |
mm |
4265 |
4230 |
|
Mast landing height |
- |
mm |
2040 |
2040 |
The CPD K2 is a 3-ton class fuel forklift with a rated load capacity of 3000kg and a load center distance of 500mm; the standard mast has a maximum lifting height of 3000mm, and 2-section/3-section masts can be customized (maximum 6000mm).
It is equipped with a standard Isuzu/Xinchai National III/National IV diesel engine, featuring strong power and high torque at low speeds; the optimized fuel injection and intake system ensurescomprehensive fuel consumption 10%~15% lower than similar products, complying with Euro III/EPA emissions, and the noise is ≤78dB.
• Wide-view mast: Reduces blind spots and improves operational safety
• Integral overhead guard: High-strength steel plate for protection against falling objects/rollover
• Electromagnetic main switch: Powers off when turned off, preventing electric leakage and mis-start
• Hydraulic double suspension: Good shock absorption, stable operation and low failure rate
• Ergonomic seat + anti-slip pedal: Not easy to fatigue during long-term operation
It is suitable for indoor and outdoor heavy-load scenarios such as factories, warehouses, docks and logistics parks.
Core advantages: Strong power, durability and low maintenance cost; the hydraulic system is equipped with Japanese Shimadzu valves/NOK seals, featuring low oil leakage rate and long service life.
12-month whole machine warranty (excluding wearing parts). Core components (engine, gearbox, hydraulic pump) enjoy 18-month priority warranty; national joint warranty is available, on-site service within 48 hours, and lifelong technical support and spare parts supply are provided.
PALLET TRUCK PALLET STACKER FORKLIFT LIFT PLATFORM LOADING RAMP TAIL LIFT