BASIC SPECIFICATIONS | |||
1.1 | Model | — | CBDE30 |
1.2 | Rated Capacity | kg | 3,000 |
1.3 | Operation Type | — | Electric |
WHEEL SPECIFICATIONS | |||
2.1 | Tyre Type | — | Front Rubber / Rear PU / Nylon |
2.2 | Minimum Fork Height | mm | 85 |
2.3 | Maximum Lifting Height | mm | 200 |
2.4 | Fork Length | mm | 1,170 |
2.5 | Fork Width | mm | 150 |
PERFORMANCE | |||
3.1 | Travel Speed (Laden / Unladen) | km/h | 5 / 5.5 |
3.2 | Gradeability (Laden / Unladen) | % | 8 / 16 |
ELECTRICAL SYSTEM | |||
4.1 | Drive Motor Power | W | 1,500 |
4.2 | Battery Type | — | Lead-acid Battery |
4.3 | Battery Voltage / Capacity | V / Ah | 48 V / 32 A |
DIMENSIONS | |||
5.1 | Overall Length | mm | 1,970 |
5.2 | Overall Width | mm | 570 / 685 |
5.3 | Turning Radius | mm | 1,510 |
5.4 | Service Weight | kg | 240 |
It features a front rubber tire and rear PU/Nylon wheels. This wheel configuration is designed for practical handling performance. The actual suitability depends on the ground conditions and load.
The CBDE30 is equipped with a 1,500W drive motor, providing stable power output for daily heavy-duty material handling.
Its travel speed is approximately 5 km/h when loaded and 5.5 km/h when unloaded, providing stable and practical transportation efficiency.
Yes. Its rated gradeability is 8% when loaded and 16% when unloaded. Please operate within the specified limits for safe transportation.
The minimum fork height is 85 mm, and the maximum lifting height is 200 mm. It is designed for pallet lifting and horizontal transportation rather than high-level stacking.
The service weight is approximately 240 kg. Its relatively lightweight design makes it easier to arrange transportation and equipment handling.